The new Cricut Autopress

Cricut revolutionizes the world of presses with its new professional Cricut Autopress. See everything you need to know and especially if it's really for you!

Disclosure: Thanks to Cricut for providing me with the product for review. I am not paid or sponsored by Cricut to write this post. All opinions are 100% my own and honest.

This post contains some affiliate links for your convenience and at no extra cost to you. Click here to read my full disclosure policy.

The new Cricut Autopress is the most sophisticated professional press.

Seriously, I've heard horror stories about some other companies' big presses. Burns, impossible to close due to lack of strength, bad pressure, wasted projects, etc.

I never dared to buy one. It scared me!

Cricut has been studying these presses for years and came up with a press that solves all problems and is super easy to use:

• The buttons to adjust the temperature and time are on a movable control panel (length of 39" (1 m.) to be accessible at all times and avoid burns.

• The press closes with two fingers and opens automatically at the end of its cycle.

• No pressure to adjust. The press automatically determines the pressure according to the thickness of your project. (It can even press materials, such as wood, up to 2" (5 cm) thick.)
• The plate is larger (15" x 12") than the larger EasyPress

• The removable mat allows the project to be positioned outside the press to once again avoid burns.
• BONUS: once closed, it can be stored vertically.

How to figure out temperature and time

All settings for Cricut materials can be found in the Cricut Heat Guide.

If you use products from a brand other than Cricut, you won't find them in the Heat Guide. Tests are also conducted for non-Cricut heat transfer materials, but due to the wide variety of materials and different formulas on the market, Cricut is not able to give exact settings.

When working with custom heat transfers, keep in mind that Cricut Autopres works differently than other traditional heat presses.

Cricut Autopress automatically applies consistent pressure for projects up to 2 inches thick. This makes transfers easy and repeatable. This also means that if you use custom heat transfers, the settings for the Cricut Autopress will be different from those recommended by the manufacturer.

So, when working with non-Cricut manufacturer settings, Cricut recommends increasing the temperature by approximately 20% and increasing the length of the pressing time to roughly 30 - 60 seconds.